|
|
| Product Features |
Single Span Cable Pull, Silver Contacts, 1NO/1NC, 120V LED Indicator
Cable pull safety switches are used to provide a readily accessible emergency stop over a long, linear distance. They are a cost-effective means of providing this emergency stop signal, compared to multiple emergency stop pushbuttons. Cable pull safety switches are not to be used as a means of personnel safeguarding, but are typically used to prevent further injury or damage to equipment when used for emergency stop signaling.
The 1CPS Series in intended for use in applications where the cable span is 250 feet or shorter. It is an economical solution for shorter runs or for zone protection typical to automated systems
Features
Direct Opening Action of NC (Normally Closed) Contacts
Reset Knob
Detects Cable Pull, Cable Slack and Cable Broken Conditions
Large Wiring Cavity with Straight-Through Wiring
Cable Tension Indicator for Easy Setup
Specifications
Die-Cast Zinc Housing, 1⁄2" NPT Conduit Openings
Contact Material: Silver
Contact Rating — Voltage, Max.: 600 VAC, 250 VDC
Contact Rating — Current: 50 mA to 10 A
Sealing: IP67; NEMA 1, 4, 12, 13
Operating Temperature: –13°F to +176°F
Dimensions, Max. (H × W × D): 11.42" × 3.90" × 2.57" |
|
View All Semiconductors
